|
2019-12-20 |
Other |
patch scoop is cracked |
Cracked in front |
|
|
cannot repair/please replace |
|
2019-12-19 |
Other |
patch for hole in bowl |
A metal bowl has a hole in the bottom and needs patching if possible. |
|
|
Cost to weld would be 3x the cost of a new bowl. Please Order, |
|
2019-12-19 |
Lights |
|
a light is out in the swanky cafe - above the music box near the wood fired ovwn |
|
|
replaced |
|
2019-12-19 |
|
|
One of the inserts on the plate for Lg ML had a leg pop off. In manager office. |
|
|
repaired |
|
2019-12-18 |
Other |
small ramp for back of pastry door |
We have a hard time getting carts in and out of the door, especially things from the warehouse/ butter from the pod. The heavier loads are extremely difficult to get inside the door. |
|
|
repaired with concrete patch |
|
2019-12-18 |
|
|
Tine on 80qt whisk needs to be re-welded. In maintenance office |
|
|
welded |
|
2019-12-17 |
Plumbing |
|
The new valve at the mix area sink is leaking pretty badly. |
|
|
replaced |
|
2019-12-17 |
|
|
The hose for the wash sink keeps popping off. Please put a new fitting on. |
|
|
repaired |
|
2019-12-16 |
Walk-In |
|
Vacuum Water from under compressors to prevent water laking into delivery room. |
|
|
vaccumed water |
|
2019-12-16 |
Other |
Seal for the Mill Cover |
Flour dust is coming out from underneath the top cover when the mill is on. Upon inspecting, we can see that the seal under the top cover has partly come off and is also stuck to the metal sleeve. It needs to be re-attached. |
|
|
replaced |
|
2019-12-15 |
|
|
For the 140qt bowl that just got welded, can we have the inside smoothed down at all? |
|
|
smoothed out welds |
|
2019-12-14 |
Other |
Top of torch needs tightening |
The top of the torch where the flame comes out got loose and fell off. Needs to be tightened or secured some how. |
|
|
complete |
|
2019-12-14 |
Other |
shrink wrapper |
The shrink wrapper pinch point is rattling. It seems to be missing a screw. |
|
|
Complete |
|
2019-12-14 |
|
|
the gfci outlet for savory reach-in #3 has tripped twice in the last 24 hours. please inspect. it went out overnight, causing the temp to rise |
|
|
Complete |
|
2019-12-14 |
Mixer |
|
mixer smells hot, also was shutting off on us. |
|
|
Complete |
|
2019-12-14 |
|
|
140qt mixer WHEEL caddy. One of the wheels is stripped and makes it challenging/iffy when the bowl is full. It is red tagged, but still in the pastry kitchen. |
|
|
Complete |
|
2019-12-12 |
Oven |
|
On 12 door Oven; Blow out burners, clean |
|
|
Complete |
|
2019-12-12 |
Oven |
|
Open access panels and remove debris |
|
|
Complete |
|
2019-12-12 |
Electrical |
|
We have a power strip that our mixers are plugged into that keeps tripping while we are using the mixers. It is happening more frequently than it has before. |
|
|
Duplicate |
|
2019-12-11 |
Other |
Long oven brooms |
Two out of our three long oven brooms have broken handles. Please repair. Thank you! |
|
|
repaired |
|
2019-12-11 |
Other |
metal removal |
The metal protector on the spice grinder is coming off and is sharp. |
|
|
removed metal jacket |
|
2019-04-25 |
|
|
Install a crash bar on the hawkins door that automatically locks when someone leaves. |
|
|
installed |
