LVO
Location:
Pastry
Work Orders
Date requested |
Type | Problem | Cost | Time spent | Status | |
|---|---|---|---|---|---|---|
| 2018-11-30 | One of the wheels on the tray rack has 2 flat sides. yikes! | replaced 3 wheels | ||||
| 2018-10-27 | Plumbing | The door on the LVO isn't staying closed. Tom took it apart and found of rusted pieces in there. He managed to "Macgyver" a piece to keep it closed but we need to order a replacement. | oiled up handle. I ordered a spare. if this handle becomes jammed again I will replace with our new spare | |||
| 2018-10-06 | The LVO is running very loud during the wash cycle. Still working fine.....Not urgent | we have another work order written for the rinse pressure. we will get to the bottom of it asap | ||||
| 2018-09-13 | LVO door | I believe Lee spoke with Cameron about this...The door to the LVO doesn't seem to be sealed/seated correctly. A decent amount of water comes out of the machine during the cycle. | ||||
| 2018-09-12 | Plumbing | leaky pipe | A pipe behind the LVO leaks during the rinse cycle. I put a piece on tape with pink highlighter on the pipe. Lee, our dishwasher, noticed it if you need more info. Machine seems to be functioning normally. | Rebuild kit has been ordered | ||
| 2018-09-02 | Other | LVO rack wheel | The LVO wheel came off, it needs a nut to keep it on. | Important | ||
| 2018-08-26 | Plumbing | On the LVO: The pressure on the rinse cycle was 10 psi max (supposed to be 15-20) and one of the top pipes seemed to have a small leak at the same time (only during the cycle) IMPORTANT (looked at by Monday day end) | ||||
| 2018-08-25 | Other | loss of water pressure | The rise cycle has lower pressure than its supposed to be by 5. The overflow pipe also sprays water out the top during rinse cycle. Possible blockage? | waiting for parts | ||
| 2018-08-23 | Plumbing | bottom right arm | There is a screw in the bottom right arm of the LVO blocking one of the spray nozzles. It is one of the end nozzles. | |||
| 2018-07-28 | Plumbing | ? | TWO issues. 1. URGENT- LVO won't turn on after being drained due to the lever to close the drain is not working properly. Machine won't come on because it will never fill up all the way. **Called Cameron and told him we could make it work tonight, but would need it for tomorrow. 2- Earlier in the day, the wash temp wouldn't get up to 150. Stayed around 130, dropped to 115 at one point. Rinse still hits 180 degrees to sanitize. **Forgot to mention on phone due to other issue and was already planning on writing work order. | |||
| 2018-07-17 | bottom door flange | The metal flange on the bottom of the door is bent near the hinge on the inside. It makes it challenging to close the door properly and pops open easily. Would be best to do early in the day. Thanks! | 25 min | |||
| 2018-07-10 | Plumbing | The pressure on the LVO is reading 150 psi below the acceptable minimum. URGENT | ||||
| 2018-06-24 | Other | The wash cycle is not coming up to temp on the LVO. It only reaches 128 degrees at the highest, when it needs to reach 150 minimum. The rinse, which sanitizes, is reaching the correct 180 degrees. URGENT | 2 hours | completed | ||
| 2018-06-13 | Plumbing | Leak in the LVO hose. It's currently taped but I didn't see a work order for it | Completed | |||
| 2018-06-08 | Plumbing | The soap for the LVO keeps pumping even when the machine isn't running. Weird | Completed | |||
| 2018-04-22 | Hinge on LVO door | The top hinge that holds the door on the LVO is missing at least one screw (I'm short and it's hard to see) and is starting to come off. I think I found one of the screws. I taped it to the machine near the hinge. | 15 mins | complete | ||
| 2017-10-01 | Plumbing | There are some screws missing in the LVO that hold the sprayer (?) on the left side in place | 120.00 | 45 mins | complete | |
| 2017-07-17 | The LVO started turning off and on today randomly, luckily not to often when its running. | 30mins | complete | |||
| 2017-04-27 | Other | Bad caster on tray rack | There is a bad caster on the LVO tray rack. It doesn't swivel. | 35 | Complete | |
| 2017-01-31 | Electrical | Once the part we need comes in, we will be able to get the machine back up to it's rightful performance! | 500.00 | complete | ||
| 2017-01-13 | Electrical | complete | ||||
| 2017-01-13 | Electrical | Big Dish Machine in Pastry | Sorry I hit enter and it submitted so I creating another work order. | complete | ||
| 2016-12-24 | Plumbing | Sprayer nozzle came free from hose. | Complete | |||
| 2016-12-24 | One of the LVO racks' wheels have gotten dangerously worn. | 20 | Complete | |||
| 2016-12-17 | Plumbing | Sprayer gun | Sprayer gun came detached from it's hose. | 2 | Complete | |
| 2016-12-12 | Other | LVO drain is clogged again. Machine was being cleaned last night and could not be drained due to the clog. | complete | |||
| 2016-12-05 | Plumbing | The drain on the LVO is clogged and will not drain properly. | complete | |||
| 2016-11-08 | Other | The knob on the inside of the door is bent. The door will close but it doesn't always stay latched once the cycle is started. | complete |