LVO
Location:
Pastry
Work Orders
Date requested |
Type | Problem | Cost | Time spent | Status | |
|---|---|---|---|---|---|---|
| 2025-01-11 | Other | As we wanted to run the first load of mats we noticed that even though the LVO was “ON” the machine was not running! | turned out to be empty | |||
| 2025-01-11 | Delime with 1 gallon Eco Lyme every 3 weeks and wash down sidewall | Delimed | ||||
| 2025-01-02 | Plumbing | Small leak coming from a bolt/plate on the LVO, not causing any known machine issues | tightened bolt | |||
| 2024-12-27 | Delime if needed and check water quality in Rack washer. | Delimed yesterday | ||||
| 2024-12-17 | Other | Equipment Maintinence | "light/med/heavy" knob on lvo is loose, not clear which level you are selecting | tightened | ||
| 2024-12-11 | Delime with 1 gallon Eco Lyme every 3 weeks and wash down sidewall | Delimed | ||||
| 2024-12-01 | Other | LVO | The drain under the LVO is clogged! | plumber unclogged | ||
| 2024-11-27 | Delime if needed and check water quality in Rack washer. | Delimed | ||||
| 2024-11-11 | Delime with 1 gallon Eco Lyme every 3 weeks and wash down sidewall | Delimed | ||||
| 2024-10-27 | Delime if needed and check water quality in Rack washer. | drained and cleaned | ||||
| 2024-10-12 | Other | LVO | Bottom right sprayer arm has stopped spinning. | replaced hub | ||
| 2024-10-11 | Delime with 1 gallon Eco Lyme every 3 weeks and wash down sidewall | delimed | ||||
| 2024-09-30 | Other | equipment maintenance | top hinge on the lvo door has a large crack in it, causing water pressure to push the door ajar enough to register as open/stop the wash cycle. | replaced | ||
| 2024-09-27 | Delime if needed and check water quality in Rack washer. | Cleaned yesterday | ||||
| 2024-09-11 | Delime with 1 gallon Eco Lyme every 3 weeks and wash down sidewall | ok | ||||
| 2024-09-11 | Delime with 1 gallon Eco Lyme every 3 weeks and wash down sidewall | ok | ||||
| 2024-08-27 | Delime if needed and check water quality in Rack washer. | delimed | ||||
| 2024-08-23 | Electrical | Rinse gauge not accurate | Accurate most of the time per Tom | |||
| 2024-08-23 | Electrical | Wash tank burner blower motor overheats and stops the wash tank from heating. | replaced motor | |||
| 2024-08-23 | Electrical | Blower motor overheats and stops the wash tank from heating. | Removed dup | Planned for Saturday | ||
| 2024-08-23 | Electrical | Third rinse heater contactor is tripping breaker | replaced contactor and wire | |||
| 2024-08-14 | Other | equipment maintinence | Hinge on the LVO door has a few screws coming loose. | repaired | ||
| 2024-08-11 | Delime with 1 gallon Eco Lyme every 3 weeks and wash down sidewall | delimed and cleaned | ||||
| 2024-07-27 | Delime if needed and check water quality in Rack washer. | Ok | ||||
| 2024-07-11 | Delime with 1 gallon Eco Lyme every 3 weeks and wash down sidewall | delimed | ||||
| 2024-06-27 | Delime if needed and check water quality in Rack washer. | delimed | ||||
| 2024-06-20 | Rinse temp / tank temp gauges not working properly. See pic for details. | no hot water | ||||
| 2024-06-11 | Delime with 1 gallon Eco Lyme every 3 weeks and wash down sidewall | delimed | ||||
| 2024-06-07 | LVO door got stuck. I found a screw and pulled it out / was able to close the door again. Missing screw is noticed on the bottom of inside door. | repaired | ||||
| 2024-05-31 | Plumbing | Door swings shut (gravity). Lee's hand got smashed the other day and Russ actually got closed in! Is there a food safe way to attach it to the wall while loading/unloading? Something similar to a bungee cord? | added bungie | |||
| 2024-05-27 | Delime if needed and check water quality in Rack washer. | delimed | ||||
| 2024-05-11 | Delime with 1 gallon Eco Lyme every 3 weeks and wash down sidewall | delimed | ||||
| 2024-04-27 | Delime if needed and check water quality in Rack washer. | delimed | ||||
| 2024-04-22 | Plumbing | Not actually the LVO, but the red hose on the wall next to it has developed a leak. | The valve was not fully turned off, there is no leak | |||
| 2024-04-12 | Other | Burner | The burner for the LVO is having trouble staying lit, wash temps have been low/all over the place for a couple of days. | the burner got flooded. Tom and Ben took it apart, dried it, cleaned it, and replaced the wiring. | ||
| 2024-04-12 | The LVO is still giving off a strong smell of gas. We ended up shutting the gas off to the hot water for it. | turned off gas | ||||
| 2024-04-11 | Delime with 1 gallon Eco Lyme every 3 weeks and wash down sidewall | delimed | ||||
| 2024-04-01 | Plumbing | The handle for the hose by the LVO fell off. Carolyn said the handle is still there, just something came unscrewed? | repaired | |||
| 2024-03-27 | Delime if needed and check water quality in Rack washer. | delimed | ||||
| 2024-03-11 | Delime with 1 gallon Eco Lyme every 3 weeks and wash down sidewall | Delimed | ||||
| 2024-02-27 | Delime if needed and check water quality in Rack washer. | delimed | ||||
| 2024-02-23 | Plumbing | LVO is making a rattling/clanking sound that is probably not ideal | Fixed sound | |||
| 2024-02-19 | Other | Machine | Vertical part of Lvo drain handle is touching the burner(?) and makes a loud rattling noise when the machine is on. | handle is ok, could not detect rattling sound | ||
| 2024-02-17 | Other | LVO burner won't stay lit- temps too low | LVO burner not staying lit or, today, won't even turn on. Wash temperatures low. | replaced contact block | ||
| 2024-02-17 | Other | Machine | Small metal piece (cover?) fell off the back | replaced | ||
| 2024-02-14 | The water wasn't running very warm tonight and the burner wouldn't reset. | Just checked 142 degree | ||||
| 2024-02-12 | The LVO wash temp has been consistently low. | adjusted in coming air, is hitting 150s | ||||
| 2024-02-11 | Delime with 1 gallon Eco Lyme every 3 weeks and wash down sidewall | delimed | ||||
| 2024-01-27 | Delime if needed and check water quality in Rack washer. | water quality good. | ||||
| 2024-01-22 | The rinse light on the LVO does not light up when going through the rinse cycle. It used to, so I am guessing it is burnt out. Can we possibly replace the bulb so it is easier to notice when the machine is going through the rinse cycle? Thanks! | replaced | ordered |