LVO
Location:
Pastry
Work Orders
Date requested |
Type | Problem | Cost | Time spent | Status | |
|---|---|---|---|---|---|---|
| 2022-10-27 | Delime if needed and check water quality in Rack washer. | LVO and Rack Washer Dellimed | ||||
| 2022-10-11 | Delime with 1 gallon Eco Lyme every 3 weeks and wash down sidewall | Complete | ||||
| 2022-09-30 | The top round dial (the one that reads the pressure) on the LVO has a broken arm (the part that points to the number). Pretty sure we need this fixed or else we cant read the pressure correctly | ordered | ||||
| 2022-09-27 | Delime if needed and check water quality in Rack washer. | Complete | ||||
| 2022-09-11 | Delime with 1 gallon Eco Lyme every 3 weeks and wash down sidewall | all caught up this week | ||||
| 2022-09-06 | The LVO rinse gauge needle is broken. | The rinse guage only works when the rinse cycle is on | ||||
| 2022-08-27 | Delime if needed and check water quality in Rack washer. | Complete | ||||
| 2022-08-15 | LVO rinse temp is not registering. The tank itself is registering, but the rinse temp during rinse cycle is not. | checked temp. this am. OK | ||||
| 2022-08-11 | Delime with 1 gallon Eco Lyme every 3 weeks and wash down sidewall | LVO, Rack Washer and CMA have been delymed | ||||
| 2022-07-27 | Delime if needed and check water quality in Rack washer. | not needed till next week | ||||
| 2022-07-23 | LVO won't run cycle | Could not Verify | ||||
| 2022-07-12 | LVO isn't reaching minimum required wash temp. | 150 degrees this morning | ||||
| 2022-06-27 | Delime if needed and check water quality in Rack washer. | delimed | ||||
| 2022-06-13 | Other | delime, change water if needed | Check over all of the above dishwashers, delime if needed and check to see if water needs to be changed in Rack Washer | delimed all but LVO will do 6/14 | ||
| 2022-06-12 | LVO still smells like it might be burning something off in exhaust. | Complete | ||||
| 2022-06-10 | Wash temp. is low. | it is running ok this morning, I will monitor thru the day | ||||
| 2022-05-27 | Delime if needed and check water quality in Rack washer. | delimed | ||||
| 2022-05-23 | LVO is struggling to meet it's minimum rinse temp. Also one of the rinse read dials isn't completely reading the first number. | replaced guage | ||||
| 2022-05-13 | Other | delime, change water if needed | Check over all of the above dishwashers, delime if needed and check to see if water needs to be changed in Rack Washer | Delimed all | ||
| 2022-03-08 | There's a small slit in the LVO sprayer hose. The slit is up near the sprayer attachment. The hole needs patching, it's causing water to leak. | repaired | ||||
| 2022-03-04 | Fan in LVO doesn't seem to be working | Complete | ||||
| 2022-02-16 | nozzle on hose attached to lvo is loose. | could not find any issues | ||||
| 2021-12-30 | Plumbing | The back bottom left hub only has three screws, it is missing a bunch. | replaced hub | |||
| 2021-12-23 | LVO struggled with getting up to minimum wash and rinse temps tonight. | Complete | ||||
| 2021-11-08 | The rinse pressure gauge needle is broken (tip fell off completely) | installed new guage | ||||
| 2021-11-03 | while hose in back of LVO is spraying small amount of water | repaired | ||||
| 2021-10-20 | LVO wash temp. running low. | Please read work orders | ||||
| 2021-10-18 | Other | Wash temp was low all night. | Temp. change causes the firing of the burner also to change, I know I have showed everyone how to refire the burner. If you do not remember please ask. | |||
| 2021-10-14 | Lot of condensation coming off the large pipe that lives on top of the LVO. | the fan is operational and there will be some condensation around the pipe | ||||
| 2021-09-25 | Is leaking water around it's back near the pump and is making a rumbling noise. | replaced motor | ||||
| 2021-09-13 | soap dispenser for lvo is plugged | replaced line | ||||
| 2021-08-10 | Other | pipe in ceiling for LVO | pipe in ceiling is leaking when the machine is running. Looks like a seal is weakening. | Condensation | ||
| 2021-07-29 | Sarah, Emily, and I all smelled gas coming from near the LVO. We powered the machine down and didn't use it for the remainder of the night, just to be extra safe. | Complete | ||||
| 2021-04-15 | Plumbing | the hose attached to the LVO has a crack in it. | complete | |||
| 2021-04-08 | The soap dispenser is clogged | cleaned | ||||
| 2021-03-24 | Wash temp. is running low | reset burner | ||||
| 2021-03-13 | Plumbing | Soap clog on inside of LVO. Lee tried to spray it out without any luck. Mike aware. | Complete | |||
| 2021-03-03 | screw missing from handle on the inside of the LVO | repaired | ||||
| 2021-02-15 | The rinse temp is running on the low side. It was holding during the first half of our shift but has since been dropping. | explained low rinse temp to manager but it was on the hobart not LVO | ||||
| 2021-02-06 | Wash temp. running low | Complete | ||||
| 2021-01-13 | LVO wash temp. was low and out of range. | |||||
| 2021-01-03 | Other | fix hub on LVO | LVO is making a strange noise during the wash cycle. Mike listened and said it's a hub. workin' | Not sure that it is a hub or bearing issue because it is not making sound all the time. It could be a soap issue. I am working on it with the manufactorer | ||
| 2020-12-27 | Other | Adjust latch on LVO Door | There is a gap on the door latch so when you turn the machine on the pressure pushes the door open and we're losing lots of water and it's creating lots of steam. | adjusted | ||
| 2020-11-11 | Other | adding guard to metal cover | Please add a guard to the metal piece that protects the motor from getting wet. One of our staff cut themselves on it. There is currently a piece of duct tape on the spot. | taped edge | ||
| 2020-10-28 | Plumbing | LVO wash temp. was low and out of range most of the night. Should be at least 150 and was hovering around 100. | see notes | |||
| 2020-10-13 | Wash temp was running low | reset burner | ||||
| 2020-09-05 | LVO at the end of the shift started making a loud unusual sound when turned on, so we stopped using it for the night. | 2:00:00 | Complete | |||
| 2020-07-18 | Hook on wall by LVO is loose. Screws need to be tightened. | Complete | ||||
| 2020-07-09 | Other | In order for the wash temperature to be the correct temp, we always have to make sure the burner is pressed 30 minutes before taking the temp. Is there a way that we can eliminate this step and not have to press the button so much, and with such a specific timing? | only 1 reset today | |||
| 2020-06-24 | Electrical | The LVO wouldn't turn back on. We took off the back panel and none of the panels were lit up. We think that it might be the on/ off button isn't working? | tripped breaker, blew fuse, replaced FLM 10 A |