|
2022-08-17 |
Other |
block window in bread sink area |
or re caulk it, and repaint, it just molds, figure out a way this won't keep happening all the time..please |
|
|
window replacement at a later date |
|
2022-08-17 |
Other |
replace light bulb in bread's old walk in in the warehouse |
|
|
|
Lights both work fine |
|
2022-08-17 |
Other |
still leaking by the copper pipe, and proofer had water in it for sure |
Thank you for caulking |
|
|
found leak |
|
2022-08-17 |
Other |
Re-caulk everywhere, in the bucket area floor |
We can not get this clean...molds daily. |
|
|
Seth will clean it. The floor will get replaced next spring |
|
2022-08-17 |
Other |
Clocks |
|
|
|
done |
|
2022-08-17 |
Other |
Red hose to MIWE is leaking |
From where the end piece connects to the hose area,. its is dripping right now. |
|
|
could not detect leak |
|
2022-08-16 |
Other |
Re-caulk all around floor drain in pastry by their sink and proofer |
This is what is leaking then running into the back of the proofer, and puddling up.. |
|
|
caulked |
|
2022-08-16 |
Other |
Re-caulk all around floor drain in pastry by their sink and proofer |
This is what is leaking then running into the back of the proofer, and puddling up.. |
|
|
caulked |
|
2022-08-16 |
Other |
Oil gun |
|
|
|
replaced cord |
|
2022-08-16 |
Other |
tiles all the way around red pole |
done work orders in the past for this, and still not done, if it could get done thank you |
|
|
It will get done when we tile later this month |
|
2022-08-15 |
Walk-In |
|
Vacuum Water from under compressors to prevent water leaking into delivery room. |
|
|
vacuumed water |
|
2022-08-15 |
Other |
Toilet in Delivery |
Toilet is still leaking :/ |
|
|
adjusted bent flush handle |
|
2022-08-15 |
Other |
wire to water chiller |
wire came out when trying to clean the mold not sure where it is supposed to go |
|
|
put temp. wires back in position |
|
2022-08-15 |
Other |
Put a single mop holder in delivery bathroom |
For the bathroom mop |
|
|
ordered |
|
2022-08-15 |
Other |
Proofer leaking |
Big puddle inside and behind it again, definitely leaking somewhere pretty good. |
|
|
cleaned out standing water and funk |
|
2022-08-12 |
Oven |
|
On 12 door Oven; Blow out burners, clean |
|
|
blew out and cleaned |
|
2022-08-12 |
|
|
De-grease, and re-grease bowl lifter lift pole and chain. |
|
|
|
|
2022-08-11 |
Office |
|
Can we please get a speaker installed in our room for emergency announcements. |
|
|
installed |
|
2022-08-11 |
|
|
All wooden tables in bread move too freely. Slide across floor when shaping on bench or putting dough on bench from buckets. |
|
|
need to have more discussion about wheels |
|
2022-08-10 |
Other |
floor machine wheel still squeaking pretty good |
|
|
|
You guys need to keep the wheels cleaned everyday. I cant go in every and clean them for you. Mop strings get in the wheels |
|
2022-08-10 |
Other |
Check the LVO its leaking by that back pipe area, I put a red tag |
|
|
|
its a pop off valve, if pressure is too high it expels water |
|
2022-08-10 |
Other |
grease bearings |
grease all 3 inserts on each mill |
|
|
greased |
|
2022-08-10 |
Office |
|
We got a black metal mesh mailbox to hold our boxes of allergen aprons. It's currently sitting on top of the flow wrapper, would you mind installing it to the right of the glovebox holder in the packaging room? Thanks in advance. |
|
|
Complete |
|
2022-08-09 |
Other |
Floor scrubber batteries |
Check battery cell levels and flush out cleaner dilution valve |
|
|
ok |
|
2022-08-08 |
Walk-In |
|
Vacuum Water from under compressors to prevent water leaking into delivery room. |
|
|
vacuumed water |
|
2022-08-08 |
|
|
12-door oven loader canvas is torn at connection by the bolts and washers holding it together |
|
|
replaced with new canvas |
|
2022-08-08 |
|
|
The 9door broom handle has come out of the broom head |
|
|
replaced and repaired |
|
2022-08-08 |
|
|
The 9door oven lights need replacing I know we can’t (do to access) replace all of them but currently we have just 1 working light |
|
|
replaced lights |
|
2022-08-07 |
Other |
Fan angled incorrectly |
Fan near proofer angled at table and not sink. We need it to point at sink to prevent flies (and also not blow paper work around on the table). Also seems like it's not fully attached to wall- top bolt loose |
|
|
Complete |
|
2022-08-04 |
Other |
Welding- Tine on 140 qt mixer broken |
One of the tines on a 140 qt whisk is broken. In maintenance office |
|
|
Complete |
|
2022-08-03 |
Other |
Bolt/screw? |
The bug light in the scaling hallway is hanging loose. It would be bad if it fell. |
|
|
could not verify |
|
2022-08-03 |
Other |
Replace tiles by drain under the tables in savory |
|
|
|
moved to tile list |
|
2022-08-01 |
Other |
Floor machines making squeaking noise |
It sounds like something metal hitting something, doesn't sound good, not sure if we should use it, and I have been off two days so no idea what happened, please take a look at it thank you |
|
|
washed dirt and mop strings out of wheels |
|
2022-08-01 |
Other |
Metal connector knob for backpack vacuum metal poles |
Where the two poles connect together, the little knob doesn't want to stay out to click the two poles together, can you fix something like that ? |
|
|
unable to repair |
|
2022-08-01 |
Other |
Hobart sanitizer not working |
|
|
|
is working now |
|
2022-08-01 |
Walk-In |
|
Vacuum Water from under compressors to prevent water leaking into delivery room. |
|
|
vacuumed water |
|
2022-08-01 |
Other |
grease bearings |
grease all 3 inserts on each mill |
|
|
greased |
|
2022-08-01 |
Plumbing |
|
Using Gas Sniffer check all gas operated for leaks or potential |
|
|
checked all equipment no leaks |
|
2022-08-01 |
|
|
Purple pan rack has broken bar |
|
|
|
|
2022-08-01 |
Other |
|
our airbrush machine isnt working properly. we took the gun apart yesterday and cleaned it. I am workinger ing if its the compressor. |
|
|
problem resolved |
|
2022-07-27 |
|
|
Oven hoe needs hook.
miwi broom needs hook.
Screw which we use to hang peel, right of 12 door oven is bent needs replaced. |
|
|
Complete |
|
2022-07-27 |
Other |
secure panel of pie stamper on motor |
The panel that houses the wires on the motor of the pie stamper has come off again. Can you re-secure?
THEN when it gets put away THE MOTOR NEEDS TO FACE THE WALL, OR THIS WILL KEEP GETTING BUMPED. |
|
|
secured |
|
2022-07-27 |
Other |
Extension hose blew up, and extension wond broke |
Barely put the end piece on and it blew up in my hand! I think proper hose made for air compressor and proper end pieces would be appreciated. And or please check it out to see if it works. I think its dangerous. |
|
|
I have an idea what you did but am not quite sure. First off it is top of the line air compressor hose. I guess someone that is familiar with air hoses should show you what to do. I will purchase another blow gun and we can try it again. |
|
2022-07-26 |
Other |
LVO , lower arm when looking at it on the left side. |
This arm was kinda hanging its missing some rivets to hold it in place. |
|
|
tightened screws |
|
2022-07-26 |
|
|
Drain condensation from air compressor tanks of both stationary air compressors |
|
|
drained |
|
2022-07-26 |
|
|
Need new miwi peel handle with hook |
|
|
Complete |
|
2022-07-25 |
Walk-In |
|
Vacuum Water from under compressors to prevent water leaking into delivery room. |
|
|
vacuumed water |
|
2022-07-25 |
Other |
Vacuum |
The vacuum for the grains on the large mill doesn’t seem to be working. |
|
|
reset compressor |
|
2022-07-22 |
HVAC |
|
Check filters and replace when necessary. Check P traps for condensation and drain as necessary. Check condensor coils. WEEKLY DURING SPRING SUMMER, MONTHLY AFTER FIRST FREEZE |
|
|
Complete |
|
2022-07-22 |
HVAC |
|
Check filters and replace when necessary. Check P traps for condensation and drain as necessary. Check condensor coils. WEEKLY DURING SPRING SUMMER, MONTHLY AFTER FIRST FREEZE |
|
|
dup |
