Sheeter
Location:
Pastry
Work Orders
Date requested |
Type | Problem | Cost | Time spent | Status | |
|---|---|---|---|---|---|---|
| 2018-01-30 | NEW sheeter blade | While putting the newest sheeter back together after cleaning, the right side blade came apart. We saw that it's missing a very small pin that holds one side together. We searched for it without any luck :( | 15 mins | complete | ||
| 2018-01-20 | NEW sheeter | The newest sheeter needs some adjustments. See email titled "New sheeter tweaks" | 15 mins | complete | ||
| 2018-01-20 | Similar problem as with the newest sheeter. Blades becomes loose due to the one piece not moving back into position. See Alise or Melissa for more details. | 62.00 | 20 mins | complete | ||
| 2017-11-27 | The bar that holds the tray at the end is missing some screws. On the left side of the sheeter that faces towards the kitchen, but the right side of the bar. | 10mins | complete | |||
| 2017-11-13 | The blade on the right hand side gaps when the rollers are closer together (sheeting thin items). It gaps on the side close to the dial and you can tell that a part is loose. | 80.00 | 1hr | complete | ||
| 2017-11-11 | Other | The right side sheeter blades seem to come loose when sheeting left to right. It usually get hungry and eats dough at about 3 on the dial | 30 | Complete | ||
| 2017-04-01 | The electrical cord sheathing is broken at the plug where wires are visible. | .5 | Complete | |||
| 2017-02-06 | Other | Fliping the belt and adjusting the roller heights | Hey guys! two things! A. The belt pointing towards the kitchen on the long sheeter is inside out and therefore collects flour that is hard to remove. It would be great if it could be flipped. B. I'v noticed that the rollers are slightly uneven so that dough on teh side awat from the "steering wheel" gets more pressure than the side closer to said wheel. if we could adjust them thatd be great. god speed | complete | ||
| 2016-12-24 | The long sweeter is studdering when running towards the right. | Complete | ||||
| 2016-09-02 | Sheeter | The sheeter blades snapped at the spring point, needs repairs, thanks! | complete | |||
| 2016-08-17 | Other | sheeter blade lock | The right side blade on the long sheeter (the one facing the mixers) seems crooked. And the left lock is loose. | complete | ||
| 2016-07-23 | Other | 2nd pastry sheeter from savory (southernmost) has no reverse action. | complete |
- « first
- ‹ previous
- 1
- 2
- 3