Moulder, Oliver Bread
Location:
Bread
Work Orders
Date requested |
Type | Problem | Cost | Time spent | Status | |
|---|---|---|---|---|---|---|
| 2026-04-17 | Lubricating | Lubricate sprockets and chains. | ||||
| 2026-04-01 | Lubricate sprockets and chains. | ok | ||||
| 2026-03-17 | Lubricate sprockets and chains. | complete | ||||
| 2026-02-24 | One wheel is stuck and it is difficult to move. | freed up wheel. took brake out of 4th wheel | ||||
| 2026-02-17 | Lubricate sprockets and chains. | lubed and cleaned | ||||
| 2026-01-17 | Lubricate sprockets and chains. | greased | ||||
| 2025-12-17 | Lubricate sprockets and chains. | lubed | ||||
| 2025-11-17 | Lubricate sprockets and chains. | ok | ||||
| 2025-10-17 | Lubricate sprockets and chains. | lubed | ||||
| 2025-09-14 | Making strange sound while pieces move through rollers. Will email video capturing sound. Upload failed. | resubmit if issue persists plz | ||||
| 2025-04-23 | Sounding rough while running. | repaired | ||||
| 2024-08-06 | Screw to access internal scraper is stuck. Left side | replaced bolt | ||||
| 2024-03-01 | Electrical | The Oliver moulder wouldn't turn on this morning. The emergency stop button seems to be the culprit again, but I did send an email to staff last time. | repaired | |||
| 2022-06-26 | Electrical | The old moulder won't turn on. | E stop was on | |||
| 2022-06-25 | A pin for the old moulder that holds the top blade left side in place has gone missing. | Complete | ||||
| 2022-05-10 | Screw piece holding canvass bar in place is loose looking bent. | that end is spring loaded for it to be removed | ||||
| 2022-05-02 | The rollers on the Old Moulder are not rotating. | sprocket moved out of alignment and realigned | ||||
| 2022-05-01 | Electrical | The rollers on the Old Moulder weren't turning when we turned it on today. The canvas portion of it is still moving though. | Complete | |||
| 2022-04-20 | Moulder stopped working | repaired | ||||
| 2021-10-04 | The top spring is not holding. Typically we set to 3 but that means now they are touching. | |||||
| 2021-06-28 | Other | Molder | Plastic blade on top roller is prone to warping or flexing. This causes dough to be lodged between roller and blade. More rigid scraper is needed. | replaced scraper | ||
| 2021-05-02 | Top scrapper isn't attached properly and will not come out easy. Second Larger Black roller closer to bottom inside machine periodically stops while in use. | Complete | ||||
| 2020-04-10 | Eating dough | replaced all 4 springs | ||||
| 2020-03-10 | Other | The old moulder stopped working for us tonight. I could hear a motor running while it was turned on, but the belt and rollers weren't moving. | molder is running fine | |||
| 2020-02-25 | Left arm to adjust number is very stiff. It is a struggle to change the setting | repaired | ||||
| 2019-09-19 | Missing small cap (to hold the bar/spring) to keep the canvas in place. Unusable in current state. | repaired pin | ||||
| 2019-09-10 | Right upper knob is difficult to move. Currently requires a towel to move the knob safely. | repaired slide | ||||
| 2019-07-29 | Other | mechanical | Making odd clicking noise. Jammed with larger loaves of bread. It might be okay - but were not able to test it on night shift. | ran normally this morning | ||
| 2019-06-01 | Other | The bar that holds the canvass flap on the upright moulder is very loose. This is the canvass flap that is under the chain flap. | repaired and ordered part | |||
| 2019-05-14 | Inside the cloth part that is currently held by electrical tape is falling. New solution needed. | removed tape | ||||
| 2019-02-26 | Metal strips with numbers need to be reattached | riveted strips on | ||||
| 2019-01-06 | Electrical | The old moulder aka upright moulder is not running at all. Seems to be caused by the broken wiring on a safety switch. Just worn out and ended up popping off the connection. Will send a picture to you Tom on what I'm referring to see if you have a idea on how to fix it but looks like to me we need a new part for this to get going again. | replaced switch | |||
| 2018-09-30 | The right knob on this moulder has trouble staying locked in position when tightened. Thank you | Added washer | ||||
| 2018-07-19 | Other | Not sure how to describe the part, better to show what needs repair. Likely just needs new tape, looks like what’s missing. I showed Kyle that was broken so either of us knows the problem | ||||
| 2018-06-10 | The moulder turns on, but will not stay on. It makes a click sound and then turns off. | Brendan says it functioned flawlessly all morning | ||||
| 2018-05-26 | Other | One of the springs is cracked. It's on the right side of the bottom blade. Noticed by Kevin L. this evening while opening up the machine to clean it. | 10.00 | 20 mins | complete | |
| 2018-03-01 | Other | Left side number strip coming off. Could it be reglued? | 15 mins | complete | ||
| 2018-01-06 | Old Moulder Number Strip | The upright moulder number strip on the right side is coming off. Sharp and dangerous. | O | 30 | Complete | |
| 2017-11-10 | Other | The old moulder was eating a lot of the sub buns today. I'm not sure what's wrong, but it wasn't behaving normally. | 20 mins | complete | ||
| 2017-10-31 | Other | One of the springs that holds down the blade broke (left side) | 16.00 | 20 mins | complete | |
| 2017-06-22 | Other | Moulder wiring. | Got a call from John at 9:30 pm saying the moulder was sparking.Came in at 3:30am to make the repaired to the wiring. | 60.00 | 1hr | complete |
| 2017-06-17 | Other | (Asked Alex to order a stop switch 6/17.)The moulder sparked on the left side underneath the roller housing. It worked for awhile but we shut it off often while we were not putting dough through it. It eventually would not turn back on. The stop button is still broken as well. | 40.00 | 30mins | complete | |
| 2017-05-31 | Other | Stop button (red button) on old moulder is still falling off. | 30mins | complete | ||
| 2017-05-24 | Other | Button | The stop button on the old moulder has detached and isn't working. | Complete | ||
| 2017-04-28 | Other | stop button is coming off | Complete | |||
| 2016-10-08 | Other | Old Moulder off knob loose | The old moulder on the left side has a on and off button and the off button on it is noticeably loose sure it would benefit from a tightening thanks guysw | Complete | ||
| 2016-09-27 | Other | The old moulder is still having the same problem it was last night. The back canvas does not move when the left knob is below 13. | complete | |||
| 2016-09-25 | Back drum (inside back canvas) does not move when left side setting is below approximately 13. Move it up, it starts rotating, move it back down, it stops rotating. | complete |