Describe the problem:
(Asked Alex to order a stop switch 6/17.)The moulder sparked on the left side underneath the roller housing. It worked for awhile but we shut it off often while we were not putting dough through it. It eventually would not turn back on. The stop button is still broken as well.
Notes:
Stop switch came undone from housing again as we're waiting for a new one to get here. The component switch inside fell against large pulley which rubbed away the insulation of the red wire,shorting out and melted the wire. I cut back the wire and reassembled the stop switch assembly then tested operation of machine. Still waiting for the replacement switch to arrive and make permanent repairs.