Bread Revent Old
Location:
Bread
Model# 624 G DG
Serial# UD2-2431-482-5102
Input 343,000 BTU
208 V, Phase 3
115 V, Phase
Work Orders
Date requested |
Type | Problem | Cost | Time spent | Status | |
|---|---|---|---|---|---|---|
| 2026-10-01 | Oven | 1. Ensure oven is operating normally 2. Blow debris out of blower wheel 3. Ensure the draft inducer is operating correctly 4. Ensure the Barometric damper is operating correctly 5. Ensure the air switches are working correctly | ||||
| 2026-07-23 | Oven | 1. Ensure oven is operating normally 2. Blow debris out of blower wheel 3. Ensure the draft inducer is operating correctly 4. Ensure the Barometric damper is operating correctly 5. Ensure the air switches are working correctly | Checked and good | |||
| 2026-07-01 | Oven | 1. Ensure oven is operating normally 2. Blow debris out of blower wheel 3. Ensure the draft inducer is operating correctly 4. Ensure the Barometric damper is operating correctly 5. Ensure the air switches are working correctly | set for the 23rd | |||
| 2026-06-27 | Old revent not firing. Tried resetting. | replaced blower motor | ||||
| 2026-04-23 | Oven | 1. Ensure oven is operating normally 2. Blow debris out of blower wheel 3. Ensure the draft inducer is operating correctly 4. Ensure the Barometric damper is operating correctly 5. Ensure the air switches are working correctly | complete | |||
| 2026-04-20 | Oven had problems holding temp at the end of the night, reset twice, would rise in temp, then drop. | replaced main electronic gas valve | ||||
| 2026-04-01 | Oven | 1. Ensure oven is operating normally 2. Blow debris out of blower wheel 3. Ensure the draft inducer is operating correctly 4. Ensure the Barometric damper is operating correctly 5. Ensure the air switches are working correctly | ||||
| 2026-03-07 | Oven | Oven not firing, dropped 90 degrees during frita bake. Sat empty for 30 mins, did not come up to 320 | draft inducer wheel was getting stuck on cutout of duct. Bent the top part back and replaced draft inducer and oven is running well consistently, | |||
| 2025-08-21 | High pitch squeak when rotating | lubed | ||||
| 2025-07-23 | The burner needed to be reset twice because it was not firing. Once on Tuesday. Starting to become a trend. | reset gas | ||||
| 2024-08-24 | Belt that rotates revent oven rack came off, it has very noticeable deterioration. Please replace belt | replaced belt and tightened tension spring | ||||
| 2024-06-15 | Oven | Old revent steam not apparent when turning oven on. Having to reset multiple times a day | ordered new burner motor | |||
| 2024-05-23 | Oven | The temp panel has been acting up. Last week it read all gibberish before we restarted it, tonight it was reading 200 deg below actual temp. Seems to be at the end of the night when we ventilate it. | replaced temperature thermocouple | |||
| 2024-04-03 | Oven | Metal piece right above oven door is hanging behind the door. When you open it debris goes everywhere. Happy to show the issue | complete | |||
| 2023-10-15 | Oven | The old Revent won’t heat up. | repaired motor | |||
| 2023-07-03 | Oven | The ramp to load racks is shifted towards the right, leaving a bump that the rack wheels have to go over on the left side. Please center the ramp with the oven. Thank you! | Complete | |||
| 2022-06-27 | Not steaming | duplicate | ||||
| 2022-06-27 | Not steaming | replaced red hat and cleaned steam line | ||||
| 2022-06-06 | Oven | Old Revent will turn itself off sometimes. Happened during a bake tonight. | Complete | |||
| 2022-04-13 | Oven | The old revent oven does not seem to be putting out any steam this evening. It happened 2 times. | scheduled with Amanda to be done soon | |||
| 2022-04-09 | Oven | Check steam function/ steam tubes on oven. We have been making sure the damper is fully shut and running extra steam. Stuffs coming out a bit dull. | see notes | |||
| 2022-03-14 | Oven | The damper on the old revent will shake open just from the oven being on. But even when it's completely closed it seems to be letting steam out. | Complete | |||
| 2020-10-03 | Oven | Oven track has troubles connecting? When loading a rack into the oven the tracks meet instead of slide onto | Complete | |||
| 2020-08-08 | Oven | No steam from old revent, even when asked politely. | 0:05 | Could not verify | ||
| 2020-01-18 | Oven | Old Revent not steaming enough. Some steam, but currently unusable for any breads that require steam. | Complete | |||
| 2019-10-31 | Oven | The Old Revent steamed nonstop tonight, creating a massive flood and almost ruining the bread inside. | replaced solenoid diaphragm | |||
| 2019-10-23 | Oven | Time and Temperature button needs to be replaced on the Old Revent | replaced board | |||
| 2019-09-12 | Oven | The Old Revent is not heating. | repaired intake air | |||
| 2019-05-14 | Light bulb needs replacing | rewired and replaced starters | ||||
| 2019-03-26 | The old recent does not seem to be steaming at full potential. Could possibly be something with the injectors or the damps? | Duplicate | ||||
| 2019-03-26 | the rack grate in the old revent is off centered causing the racks to go in on a difficult slant and sometimes in need of multiple attempts. Can we get this realigned to have easier access please? Thank you! | Completed | ||||
| 2019-03-17 | Our Old Revent time to time has some trouble giving us the right amount of steam. We once cleaned the steam lines and whatnot before and it helped greatly. Can we take a gander at the steam function on this machine please. | removed steam line and cleaned, washed shelves and roller balls | ||||
| 2018-11-09 | Oven | There are no details to this work order | ||||
| 2018-11-09 | Oven | There are no details to this work order | ||||
| 2018-11-09 | Oven | There are no details to this work order | ||||
| 2018-11-09 | Oven | Loud noise from exhaust | sounds normal | |||
| 2017-10-13 | Oven | oven not holding temp | 1hr | complete | ||
| 2017-07-27 | Oven | The oven timer is counting down too quickly. 1 minute=Approx. 6 seconds | $1,600 | 1hr | complete | |
| 2017-07-17 | Electrical | The old Revent went off as though it was done baking after 1-1.5 minutes when it had been set for 16. It did this twice in a row before we switched to the other oven. The temp also dropped (though that could have been due to door openings and steaming twice in a row [since the bake had ended before the delay, we re-steamed]). I turned it off and then tried again an hour or so later, and it went off after just a minute again, so we stopped using it. | 20 mins | complete | ||
| 2017-06-15 | Oven | Oven will not fire up burner or blower. | $169.60 motor, $180 service call | 5 | Complete | |
| 2017-01-16 | Oven | complete | ||||
| 2017-01-16 | Oven | not steaming and causing very poor dull bread | complete | |||
| 2016-12-19 | Oven | old revent not steaming well, bread comes out looking dull | complete | |||
| 2016-11-19 | Oven | Chirping noises coming from top of oven. | Complete | |||
| 2016-11-18 | Oven | The bottom of the oven door is missing about a 4 inch piece of insulating strip. | 91.02 | complete | ||
| 2016-11-03 | Oven | The old revent has steam problems for awhile now but it has continued to get worse. Today it released zero steam while baking. I even restarted the bake to try and get steam and none was detected. | complete | |||
| 2016-09-30 | Oven | It is very dark in side this oven. Hard to tell if it even has dead bulbs in it. Also, the view window is very dirty. It would be lovely to have bright light(hi temp led's?) and a spanking clean glass portal. When you have a chance. thanks.** After inspection, found wire harness cut and florescent tombstones burned. Ordering new fixture. | 100.00 | In progress | ||
| 2016-05-31 | Oven | the old revent has not been producing as much steam as it should when baking. It has resulted in some duller bread than we would like to see. Can we please get it serviced asap to ensure the correct steam and product quality? | complete | |||
| 2016-04-22 | Oven | Old revent not holding temp. | Blew out the squirrel cage, oven worked for four loads, dropped temp on fifth, Scott from V&M coming this afternoon | |||
| 2016-04-07 | Oven | Exhaust fan motor mount is broken | $40.00 | Replaced motor mount |