Pastry Revent #4
Location:
Pastry
Model# 724 G CG U
Serial# U14-2431-175-2014
Input 343,000 BTU/HR
220 V Phase 3
110 V Phase 1
Model #:
724 G CG U
Serial #:
U14-2431-175-2014
Work Orders
Date requested |
Type | Problem | Cost | Time spent | Status | |
|---|---|---|---|---|---|---|
| 2026-04-03 | Oven | 1. Ensure oven is operating normally 2. Blow debris out of blower wheel 3. Ensure the draft inducer is operating correctly 4. Ensure the Barometric damper is operating correctly 5. Ensure the air switches are working correctly | complete | |||
| 2026-04-01 | Oven | 1. Ensure oven is operating normally 2. Blow debris out of blower wheel 3. Ensure the draft inducer is operating correctly 4. Ensure the Barometric damper is operating correctly 5. Ensure the air switches are working correctly | ||||
| 2026-03-24 | On top of the revent, there's a belt-driven thing. The belt has a cut running halfway through it. | replaced | ||||
| 2026-03-07 | Air intake on Revent 4 blew off when I started the oven. Greg put it back up, but it needs to be reattached. Thanks! | everything is currently working well. have verified operation. But we will be doing a PM next on this oven. | ||||
| 2025-12-14 | Oven | 2 single wide baking racks are stuck in Oven 4, we cannot take them out. When the oven is on, the racks are not rotating, but will rotate manually when the door is open. | jaison fixed rotation belt that had slipped off | |||
| 2025-08-28 | Oven | Lights in revent 4 and revent 3 are out | Planned for Jan/Feb | |||
| 2024-09-27 | ramp for revent 4 is not fastened down. | fastened down | ||||
| 2023-12-18 | Oven | Ramp not attached to oven | none of the ramps are attached. They lay on the ground. | |||
| 2023-10-29 | Oven | The exhaust fan on top of the oven, facing towards the dish room, is squeaking when the oven is on. | oiled the metal contacts causing squeaking | |||
| 2023-10-06 | The vent had black water leaking out during the storm. At one point I had to have someone hold a sheet tray to collect the dirty water while I removed the rack of muffins from the oven. (so they wouldn't be contaminated) Not sure if anything can be done. | thank you, checked bonnet | ||||
| 2023-09-10 | Oven | The ramp on Pastry Oven #4 needs to be adjusted. When taking racks OUT the right side of the ramp is too high and the rack gets stuck. This is very dangerous because the hot trays dislodge near the users face when you pull it over the bump. | cleaned crap out from under ramp | |||
| 2022-09-05 | Other | ramp for oven/ tiles | The ramp for oven #4 seems to be slightly titled up inside of the oven. There's also a chunk of tiles missing. | Complete | ||
| 2022-07-12 | Oven | Oven number 4 was jamming a lot. | CHECKED OVER, OK | |||
| 2022-04-02 | Oven | Oven #4 has been flipping the breaker, we will need it FIRST thing tomorrow. | ||||
| 2022-01-19 | Oven | Running fine but giving off an exhaust smell. | Complete | |||
| 2022-01-07 | Plumbing | The space above oven #4 is constantly dripping. | I have a new thermostat that will get installed next week which will stop the condensation problem | |||
| 2021-12-26 | Oven | Oven number 4 is flashing error breaker motor | repaired | |||
| 2021-11-13 | Oven | Timer on oven reset and stopped working during bake. | Complete | |||
| 2021-10-18 | timer not working properly | duplicate | ||||
| 2021-09-12 | Oven | Really loud rumbling when oven is venting. | checked belt and damper all is ok | |||
| 2020-09-21 | Oven | Oven #4 squeals when it's turning. | replaced belt | |||
| 2020-08-02 | Oven | An alarm went off that said oven breaker in red. I've never seen this alarm before. | Complete | |||
| 2020-01-15 | Oven | Oven number 4 wouldn't come up to temp when we went to use it in the afternoon. Tried turning off for a bit and turning it back on, but to no avail. Hopefully it will have miraculously gotten better in the morning, but definitely should be checked out. Thanks! | could not verify | |||
| 2019-12-28 | Oven | Oven makes chirping/squeaking sounds only when on and rotating. Sounds like it's coming from the top outside of the oven. | Complete | |||
| 2019-04-01 | Oven | One of the screening plates above and to the left of the oven keeps vibrating out of place. I tried, but could not get the support tables fully inserted. Good news is that it doesn't fall to the ground as it catches on the structure of the front of the oven. | properly inserted plate | |||
| 2019-01-31 | Oven | Oven dropped 70F while baking and hasn't come back up. | removed blower motors and cleaned out, there is no reset button on 3 and 4 | |||
| 2019-01-24 | Oven | Oven suddenly dropped 20 degrees. Is there a reset button? We took the cakes out just to be safe | removed burner, cleaned and reassembled | |||
| 2019-01-24 | Oven | Oven suddenly dropped 20 degrees. Is there a reset button? We took the cakes out just to be safe | duplicate | |||
| 2018-11-05 | Oven | ramp | Any way to make the ramp more flush on oven #4. When unloading pastries the hot rack catches the lip and tilts towards our faces. | cleaned under ramp and knocked it down the best I could | ||
| 2018-07-22 | Oven | This oven makes an odd noise when you open and close the door- feels like something is resisting. Also the top piece that you load baking racks onto will not stop in the correct position. If the timer is not going and has completely stopped it should line up so that you can easily load and unload the rack. It stops off-center. Also seems loose. It is still usable but would be best to fix before it gets worse. | ||||
| 2018-05-08 | Oven | On oven #4, the rack to load the baking rack onto seems to be too low. The wheels are dragging and stopping the rack from properly spinning when it has some weight on it. Would be ideal to look at earlier in the day. | 10mins | complete | ||
| 2018-05-06 | oven #4 - pastry kitchen | Oven is making a loud squeaky noise while in use. | 20 | Complete | ||
| 2018-05-05 | Oven | Oven #4 is squeaking pretty aggressively while in use | 20 | Complete | ||
| 2018-03-29 | Oven | Oven is squeaking pretty badly when in use | 15 mins | complete | ||
| 2018-01-28 | Oven | We were having a hard time loading the oven today. Seems the part at the top that rotates isn't lowering enough and needs to be adjusted | 20 mins | complete | ||
| 2017-10-24 | Oven | There is a drip coming from the venting above oven #4. Not sure if it's just condensation from the over or from the A/C condenser shenanigans. Drips on food and people. | 10mins | complete | ||
| 2017-10-15 | Oven | Panel on oven #4 | The panel to the right of the door keeps popping off. It's almost fallen on someone. Can you secure? | 20 mins | complete | |
| 2015-08-14 | Oven | The part at the top of the oven barely raises or lowers no matter how much we open/close the door. It makes it very difficult to load and unload baking racks. | zero | David demonstrated with large and small racks, loaded and unloaded and the rack mount was working as it should be | ||
| 2015-06-26 | Oven | panel on oven | The right panel on the newest oven is loose and is unsafe. | COMPLETED.reattached panel | ||
| 2015-05-01 | Oven | The right side panel fell off the front of the oven. It's leaning up against the side with a note on it. | Re-installed with velcro strips |