|
2026-09-08 |
HVAC |
|
Power unit down. Remove drain trap. Place custom cut "plug" panel on the bottom of filter tray, positioned to allow water to drain out the pan while blocking water from going down into duct. Using coil cleaner hose attachment, spray coil cleaner solution liberally into the fins/coils. Let sit for 5 minutes. Rinse thoroughly with water. Use plastic brush if necessary to loosen up debris. Repeat steps if not fully clean/shiny. Give final water rinse. Remove "plug" panel and power unit back on. |
|
|
|
|
2026-09-01 |
HVAC |
|
Power unit down. Remove drain trap. Place custom cut "plug" panel on the bottom of filter tray, positioned to allow water to drain out the pan while blocking water from going down into duct. Using coil cleaner hose attachment, spray coil cleaner solution liberally into the fins/coils. Let sit for 5 minutes. Rinse thoroughly with water. Use plastic brush if necessary to loosen up debris. Repeat steps if not fully clean/shiny. Give final water rinse. Remove "plug" panel and power unit back on. |
|
|
moved to MX |
|
2026-07-18 |
HVAC |
|
Using electric pressure washer, carefully, thoroughly, and methodically wash the condenser fins/coils on exterior of unit. Wash in up/down strokes from directly straight angle. Do not damage fins. Periodically turn off unit to let water drain out. |
|
|
Completed. Used the electric power washer to clean the condenser fins/coils. |
|
2026-07-01 |
HVAC |
|
Using electric pressure washer, carefully, thoroughly, and methodically wash the condenser fins/coils on exterior of unit. Wash in up/down strokes from directly straight angle. Do not damage fins. Periodically turn off unit to let water drain out. |
|
|
set for the 18th |
|
2026-06-12 |
HVAC |
|
Install replacement motor on packaging/offices HVAC unit on roof |
$500 |
|
Installed new fan motor. |
