BAKE! Revent #1
Location:
BAKE! Back Room
Model Number 625 G DG
Serial Number UOO-2631-717-4400
208 V
Phase 3
60 Hz
115V
Phase 1
60 Hz
149,000 BTU/HR
Work Orders
Date requested |
Type | Problem | Cost | Time spent | Status | |
|---|---|---|---|---|---|---|
| 2026-10-03 | Oven | 1. Ensure oven is operating normally 2. Blow debris out of blower wheel 3. Ensure the draft inducer is operating correctly 4. Ensure the Barometric damper is operating correctly 5. Ensure the air switches are working correctly | ||||
| 2026-10-01 | Oven | 1. Ensure oven is operating normally 2. Blow debris out of blower wheel 3. Ensure the draft inducer is operating correctly 4. Ensure the Barometric damper is operating correctly 5. Ensure the air switches are working correctly | ||||
| 2026-07-03 | Oven | 1. Ensure oven is operating normally 2. Blow debris out of blower wheel 3. Ensure the draft inducer is operating correctly 4. Ensure the Barometric damper is operating correctly 5. Ensure the air switches are working correctly | Completed. Undo the union for the gas and dismount the blower and clean the blower wheel. Cleaned the blower wheel using water and reinstall blower wheel and refastened the gas union. Used the Manometer to read and record parameters of the oven. Visually checked the Barometric damper. All check is running normally. | |||
| 2026-07-01 | Oven | 1. Ensure oven is operating normally 2. Blow debris out of blower wheel 3. Ensure the draft inducer is operating correctly 4. Ensure the Barometric damper is operating correctly 5. Ensure the air switches are working correctly | Duplicate | |||
| 2026-04-03 | Oven | 1. Ensure oven is operating normally 2. Blow debris out of blower wheel 3. Ensure the draft inducer is operating correctly 4. Ensure the Barometric damper is operating correctly 5. Ensure the air switches are working correctly | complete | |||
| 2026-04-01 | Oven | 1. Ensure oven is operating normally 2. Blow debris out of blower wheel 3. Ensure the draft inducer is operating correctly 4. Ensure the Barometric damper is operating correctly 5. Ensure the air switches are working correctly | ||||
| 2026-03-14 | Oven | Revent oven died on us during class. It was making what sounded like angry fan belt sounds and then stopped heating. | disassembled, cleaned, reassembled and calibrated. Working nominally now. | |||
| 2026-03-01 | Oven | Revent #1 still not maintaining temperature | replaced flame sensor and electrode and air switch | |||
| 2026-02-26 | Oven | Recent #1 (the one with steam) is not stsying at temperature. We had it at 450 and it stayed there for a while, then started dropping dramatically. Tested it, turned it on and off again, and did it again. | closing this work order out. it has been repaired for all intensive purposes. please resubmit if problem persists. | |||
| 2026-02-26 | Oven | Recent #1 (the one with steam) is not stsying at temperature. We had it at 450 and it stayed there for a while, then started dropping dramatically. Tested it, turned it on and off again, and did it again. | duplicate | |||
| 2026-02-01 | Oven | Blow out elements, clean out debris behind control panels, check exhaust valves for all BAKE! ovens | checked and all functioning nominally | |||
| 2026-01-16 | Oven | Can we have steam in Revent #2? | installed steam. had to redo piping and solenoid | |||
| 2025-08-01 | Oven | Blow out elements, clean out debris behind control panels, check exhaust valves for all BAKE! ovens | Cleaned | |||
| 2025-05-23 | Oven | the speed rack is askew in Revent #1 | replaced two of the incorrect style wheels | |||
| 2025-05-15 | Oven | Revent oven #2 is making an incessant squeaking noise while it is spinning. | Repaired squeak and repaired faulty door | |||
| 2025-02-01 | Oven | Blow out elements, clean out debris behind control panels, check exhaust valves for all BAKE! ovens | Checked and good | |||
| 2024-08-01 | Oven | Blow out elements, clean out debris behind control panels, check exhaust valves for all BAKE! ovens | Vacuumed out | |||
| 2024-02-07 | Oven | Oven not heating up now, same one from Sunday's work order. | Oven is up and running now. Minor repairs left. Marking as complete | |||
| 2024-02-04 | Oven | Revent oven #1, the one in the back corner, stopped heating up. | removed duplicate work order - ETA fix Mon or Tuesday | |||
| 2024-02-01 | Oven | Blow out elements, clean out debris behind control panels, check exhaust valves for all BAKE! ovens | blown out | |||
| 2023-10-20 | Oven | Oven #2 is not holding temp. | could not verify any teemp. drops | |||
| 2023-08-17 | Oven | Oven #1 has what appears to be a metal support piece on the vent loosening up and it's flapping/rattling while on. It might just need a bolt tightened. We are using the oven this afternoon, but will be done with it around 4pm until the evening class needs it. | repaired | |||
| 2023-08-01 | Oven | Blow out elements, clean out debris behind control panels, check exhaust valves for all BAKE! ovens | blew out and checked | |||
| 2023-03-15 | Oven | The rack in the revent now doesn't turn due to being screwed into the ceiling of the oven. | ok | |||
| 2023-03-09 | Oven | Oven #2 the speed rack inside is coming off the top and staying stuck at an angle. We are unable to have the rack rotate. | repaired | |||
| 2023-02-01 | Oven | Blow out elements, clean out debris behind control panels, check exhaust valves for all BAKE! ovens | cleaned | |||
| 2022-12-16 | Oven | The caster on the rack that stays in oven is broken off. | replaced 2 wheels | |||
| 2022-11-17 | Oven | Corner oven keeps shutting off on it's own. Sue tried the trick Mike taught her and it's still not working. | repaired | |||
| 2022-11-13 | Oven | Oven number 1 is still not working. | Complete | |||
| 2022-11-12 | Revent #1 is not heating up. | Complete | ||||
| 2022-08-12 | Oven | Recent number one is making a LOUD rattling noise when turned on. Just started today. | Complete | |||
| 2022-08-12 | Oven | Revent oven #1 is not heating up. | repaired relay | |||
| 2022-08-01 | Oven | Blow out elements, clean out debris behind control panels, check exhaust valves for all BAKE! ovens | blew out and checked | |||
| 2022-06-30 | Oven | Oven 2 really smelled strongly of gas this evening. It made the entire back room smell, especially when it was on. | unable to detect any leaks, will monitor | |||
| 2022-03-19 | Oven | Oven baking rack is stuck. It came off the lifting hook mechanism and is now jammed. | Complete | |||
| 2022-03-05 | Oven | oven #2 is whistling and still has the door problem. | Complete | |||
| 2022-02-20 | Oven | Revent oven #2 has started squealing when on and rotating like it needs a new belt in the motor above it. It also still has that previous issue of the oven door needing to be push in harder for it to start rotating after we hit "Start". | Complete | |||
| 2022-02-01 | Oven | Blow out elements, clean out debris behind control panels, check exhaust valves for all BAKE! ovens | blew out | |||
| 2021-08-01 | Oven | Blow out elements, clean out debris behind control panels, check exhaust valves for all BAKE! ovens | Blew out | |||
| 2021-06-26 | Oven | The baking rack that is attached to the rotating piece at the top of the oven with a U shaped bracket is not level causing our cakes and pies to bake unevenly. Can this be adjusted and checked with a level? It's the corner Revent oven in back next to the garage door. | Complete | |||
| 2021-02-01 | Oven | Blow out elements, clean out debris behind control panels, check exhaust valves for all BAKE! ovens | Complete | |||
| 2020-08-01 | Oven | Blow out elements, clean out debris behind control panels, check exhaust valves for all BAKE! ovens | cleaned and inspected | |||
| 2020-03-10 | Water is leaking from roof onto oven by our white board | found leak near Revent stack, patched with rubber | ||||
| 2020-02-01 | Oven | Blow out elements, clean out debris behind control panels, check exhaust valves for all BAKE! ovens | blow out and cleaned | |||
| 2019-10-05 | Oven | Oven is not holding temperature, and it won't go over 439 degrees. | Complete | |||
| 2019-08-01 | Oven | BAKE! | Blow out elements, clean out debris behind control panels, check exhaust valves for all BAKE! ovens | Complete | ||
| 2019-06-23 | Oven | One of our Revent ovens in the back room has been dropping in temp despite being set at 400. | worked fine all weekend, checked over blower, igniting when calling for heat | |||
| 2019-04-30 | Oven | OUTSIDE OF DOOR VERY VERY HOT WHEN OVEN IS ON, EASY TO BURN HAND | Installed new gaskets | |||
| 2019-02-01 | Oven | BAKE! | Blow out elements, clean out debris behind control panels, check exhaust valves for all BAKE! ovens | cleaned and blow out intake motor | ||
| 2018-08-01 | Oven | BAKE! | Blow out elements, clean out debris behind control panels, check exhaust valves for all BAKE! ovens |